Posts Tagged ‘jim wasas’

How to reduce global warming and improve the bottom line

Tuesday, November 10th, 2009

What does that mean?  That means Ray Stenger and Jim Wasas turned heads recently by announcing they have discovered how to convert CO2 and H2S, two “bad actors,” into harmless compounds in a self-sustaining process.

“The SWAP is a process that can eliminate CO2 by recycling waste, produce a negative carbon footprint and improve the bottom line…” was the message executives at the Houston Global Refining Strategies Summit (www.refiningna.com) heard for three days.

“SWAPSOL earned the biggest buzz I’ve ever seen at one of our shows,” said John Mackenzie, business development manager for World Trade Group, a leader in event production for the energy sector. “From Big Blue on down, it appeared company executives had to get in line to speak with these gentlemen about the science.”

The Stenger-Wasas Process (SWAP) www.swapsol.com is not about capturing and storing CO2 underground (CCS).  The SWAP converts and breaks CO2 into its parts – parts that can be cycled back into the reaction to convert more CO2.

Wolf Koch, Swapsol Director; Jim Wasas and Ray Stenger

Wolf Koch, Swapsol Director; Jim Wasas and Ray Stenger

Federal legislation to force lower emissions in the oil and gas sector and increase taxes for those who do emit CO2 has industry executives deeply concerned.  They say it’s a fundamental question of survival with some gas leaders saying thousands of jobs will be lost.  Executives at SWAPSOL said they were thankful to be part of the discussion moving forward.

“Congress setting tough rules on carbon emissions in some way is inevitable,” said Evan Howell, SWAPSOL Corp. executive vice president for marketing and communications.  “As we build our company around the science, we’re talking with potential partners to develop what we see are a wide variety of commercial applications both in and outside the petroleum industry.”

Keynote speakers in Houston called for the industry to take a greater role in shaping legislation and make a greater commitment to investing in new and innovative technologies.

SWAPSOL is scheduled to present at the Global Refining Strategies Summit May 18-19, 2010, in Rotterdam where they will present the SWAP to industry executives from Europe, China and the Middle East.

SWAPSOL TO ANNOUNCE BREAKTHROUGH DURING NATIONAL CHEMISTRY WEEK

Monday, October 5th, 2009

Chemical reaction verified to convert carbon dioxide (CO2) and hydrogen sulfide (H2S) to form harmless compounds, contribute to climate change fight

MONMOUTH JUNCTION, N.J. (October 5, 2009) – Two New Jersey scientists at SWAPSOL Corp. (www.swapsol.com ) have discovered a chemical process that reacts hydrogen sulfide (H2S) with carbon dioxide (CO2), eliminating both. SWAPSOL will hold a seminar on the science and potential industrial applications during National Chemistry Week on Oct. 21, 2009, on the Rutgers University Cook Campus in New Brunswick, N.J. http://www.swapsol.com/events

The discovery may shatter preconceived notions about energy and chemistry and play a role in the fight against climate change and global warming.  Unlike a carbon capture process, the Stenger-Wasas Process or SWAP is a carbon conversion process, verified in the laboratory to break down CO2 into its inert compounds.

Ray Stenger and Jim Wasas discovered the SWAP, a suite of hydrocarbon reactions based on the previously unknown reaction between CO2 and H2S. The SWAP was verified in the laboratory to reduce H2S below detectable levels (below 4 ppb) by gas chromatography while converting proportionate amounts of CO2 into innocuous compounds such as water.  Sour gas processors and high-sulfur crude oil refiners may be the first to benefit from the SWAP which could substantially reduce operating costs and mitigate CO2 emissions.  The SWAP may also have potential applications in other sectors where H2S is present, such as landfills, tanneries and coke ovens.

Thermodynamic and chemical kinetics studies indicate that the SWAP is exothermic and the heat liberated can be easily managed and controlled.

The quantitative thermodynamic and kinetic information was verified by an independent firm, which also determined the kinetic and thermodynamic parameters of the process.

Gas chromatography (GC) was independently conducted by Gene Hall, Ph.D., professor of analytical chemistry at Rutgers University.  He found the SWAP reaction reduced H2S to below 4 ppb.

“My GC studies demonstrated the SWAP has strong potential for dramatic H2S reduction,” said Hall, adding the SWAP discovery was extremely important. “It appears they may have something very special indeed.”

To learn more about the seminar and the SWAP, visit www.swapsol.com/events

r2ske4b3tm

Can sulfur recovery breakthroughs reduce our environmental footprint?

Saturday, August 22nd, 2009

There has been a recent discovery of a previously unknown exothermic reaction between CO2 and H2S.  It’s a reaction that may fundamentally alter the hydrocarbon industry.  Work continues.  It’s called the Stenger-Wasas Process (SWAP) developed by Ray Stenger and Jim Wasas.  And it may make obsolete traditional petroleum methods, such as the Claus Process and its variants.

The SWAP: Unrefined sour natural gas is fed into the catalytic reactor, where the SWAP reaction occurs between CO2 and H2S. Refined gas flows past the separator. CO2 and H2S are converted into water, sulfur and carbon in the collector. In a reaction that can start in less than one second at very moderate temperatures, the result of the SWAP is refined natural gas.

Brief Overview

Sulfur contaminants such as hydrogen sulfide (H2S), carbonyl sulfide (COS), and mercaptans in gas streams can create unacceptable levels of sulfur emissions in power applications or poison catalysts used in chemical synthesis. Sulfur contaminants are usually reduced to less than 300 ppm for power generation and considerably lower (<1 ppm) for the synthesis of methanol, ammonia, and Fischer-Tropsch (FT) liquids.

Sulfur recovery unit (courtesty: C&I)

Sulfur recovery unit (courtesy: C&I)

Sulfur Recovery Processes

Removing sulfur from a natural gas or syngas process stream is only part of the story. The residual sulfur present in an acid gas stream must then be recovered to prevent environmental and safety harms, as well as meet operator permit requirements. Two main technologies have traditionally been used commercially to recover sulfur: the Claus process (partial combustion) for high levels of sulfur, and catalytic Redox processes, for relatively low levels of sulfur. In recent years, bio-chemical based technology, the Thiopaq Process, has been developed and commercially implemented. Other recent developments include the development of hybrid processes that combine Claus and Redox technology and are used for tailgas cleanup in Claus plants.

The SWAP has been verified by gas chromatography in the laboratory to reduce H2S to below the limit of detection (about 4ppb) in a single pass through the SWAP column.

The SWAP in the laboratory

The SWAP in the laboratory

Classified as hazardous waste by the EPA, H2S disposal requires expensive processing, i.e. the Claus Process. The SWAP may reduce related capital costs for the H2S disposal resulting from crude oil desulfurization, while simultaneously eliminating substantial amounts of CO2.

CLAUS PROCESS

Technology Description

In the Claus process, a high H2S concentration stream is the feedstock for recovery to elemental sulfur. Roughly 1/3 of the H2S is burnt (partial combustion) to form sulfur dioxide (SO2). The remaining H2S reacts with the synthesized SO2 over an alumina or bauxite catalyst to produce elemental sulfur. Depending on their concentrations, the unreacted components (tail gas), such as residual SO2, CO2, and H2S, are either emitted, thermally oxidized, or further treated in an additional recovery process.

(US Environmental Protection Agency, AP42, 5th Edition, “Compilation of AirPollutant Emissions Factors Volume 1: Stationary Point and Area Sources, 1995) The Claus process is thermodynamically limited to ~97 percent sulfur recovery, although additional treatment steps, such as tail gas sulfur recovery, can increase the recovery rate.

Commercial Manufacturers and Applications

The Claus process is the oldest commercial sulfur treatment process, with development dating back to the late 19th century. Today, Claus processes are the main step used for elemental sulfur production worldwide-in fact, 90 percent to 95 percent of the sulfur recovered in the United States was from the Claus process. Almost 40 companies operate over 1000 Claus processes in the United States, recovering nearly 9 million tons per year of sulfur. The petroleum and natural gas industries are the main users of the technology, with IGCC applications making up a small but growing segment of the user population.

With catalytic refining, environmental footprint and operational costs can be lowered. This and other breakthroughs may change the landscape of hydrocarbon refining.  www.swapsol.com

An Inconvenient Truth Inspired a Breakthrough in Natural Gas Conversion

Thursday, August 13th, 2009

It looks like two New Jersey scientists have come up with something that may potentially have a significant impact on our future energy policy, and it comes from toxic hydrogen sulfide (H2S).

"An Inconvenient Truth" (2006)

Ray Stenger went to see Al Gore’s “An Inconvenient Truth” when it came out in 2006.  An engineer by trade, Stenger already a deep understanding of the chemistry behind the elements Gore proposed as global warming causes, among those being carbon dioxide.

But while Stenger was intrigued by some of the claims made by the documentary, he still had some questions about how we got into this mess in the first place.  Addiction to oil and coal were the obvious reasons because of sulfur, sulfur dioxide (SO2) and of course, carbon dioxide. Chief emitters were the coal plants, the concrete plants and the oil refineries.  But he kept coming back to carbon dioxide. With two parts oxygen, CO2 should theoretically be a powerful oxidizer.

Ray Stenger and Jim Wasas

Ray Stenger and Jim Wasas

He got together over lunch with his friend, Jim Wasas.  Among other things, Wasas was a specialist in catalysts.  Over the months they talked. Being the entrepreneurs that they were, they worked to figure out what conditions need to exist for CO2 to begin breaking down into its components. In 2007, they figured it out. And they figured out that hydrogen sulfide played a key role. But they needed to find a place where H2S and CO2 were both present. It was “sour” natural gas – an area of key interest of those involved in natural gas conversion and processing. Then came the catalyst to finish the job. Wasas’s extensive experience in catalysts brought him around to a hidden-in-plain-sight natural material that did the job extremely well.  And the discovery has been shown to potentially have a wide range of applications.  They call this suite of solutions the “Stenger-Wasas Process” (SWAP).

In less than a second in a single laboratory column, the SWAP reacts H2S and CO2, converting the mix into water, carbon and sulfur. The SWAP is not a carbon capture process. It is a conversion and elimination process based on a previously undiscovered exothermic reaction between the two. Stenger and Wasas seemed to have stumbled upon and verified An Inconvenient Truth if only because it’s not in the textbooks yet. http://www.swapsol.com